How to Press Your DTF Transfer

1. Set Your Heat Press:

   • Temperature: 300–320°F (149–160°C)

   • Pressure: Medium to firm

   • Time: 15 seconds

2. Pre-Press Your Garment:

   • Press your blank shirt (or item) for 5 seconds to remove moisture and wrinkles.

3. Place the Transfer:

   • Position your DTF transfer face-up on the garment – design side up, film side down.

4. Press It:

   • Cover with a Teflon sheet or parchment paper (optional for added protection).

   • Press for 15 seconds at set temperature and pressure.

5. Let It Cool:

   • COLD PEEL – Wait until the transfer is completely cool to the touch.

   • Slowly peel the film off from one corner.

6. Final Press (Recommended):

   • Cover with a Teflon sheet again.

   • Press for an additional 5–10 seconds to lock in the design.